- 0 Comment(s)
1. Screw the eGo atomizer onto the eGo-T battery:
Screw and connect the eGo-T battery with the eGo-T tank atomizer.
2. : Uncover the eGo-T pre-filled cartridge:
Step 1: Cut the plastic package;
Step 2: Remove the rubber from the end of the cartridge.
Step 3: Take off the eGo-T cartridge plastic cover.
3. Put the eGo-T tank cartridge into the eGo-T atomizern and start using the e-cigarette
To operate the battery press the button 5 times to switch it on and repeat to switch it off.
Hold the button down while inhaling the vapour.
4. To refill the eGo T- cartridge:
Step 1: Drip the e-liquid into the eGo-T tank cartridge until the top line of the cartridge.
Step 2: Put the rubber seal back onto the cartridge.
Step 3: Wipe the cartridge and the atomizer with a dry cloth to remove any spillage.
5. Charge the eGo-T battery:
Screw the battery onto the USB charger you have received within the kit and insert the USB end into a computer or a USB wall plug. leave the battery on the charger for 12 hours for the first time. After it will charge within 2-3 hours. The red light on the USB charger will change to green when the eGo battery is fully charged.